Ultrasonic flaw detectors. Estimation of the measurement uncertainty by calibrated attenuator\gain

Authors

  • Panjiev Ulugbek Independent researcher at the Islam Karimov Tashkent State Technical University, master's degree
  • Muminov Najmiddin Shamsiddinovich Doctor of Technical Sciences, Prof., muminov

Keywords:

Non-destructive testing, ultrasonic method, flaw detector

Abstract

There are technical specifications such as linearity accuracy, gain and also material velocity which is estimated during the calibration of ultrasonic flaw detectors. One of these main parameters is the gain. This article considers the assessment for the measurement uncertainty by calibrated attenuator\gain of ultrasonic flaw detectors, which is used in the ultrasonic method of non-destructive testing, using ultrasonic tester

Downloads

Published

2024-09-14

Issue

Vol. 35 (2024): ERB

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

Ultrasonic flaw detectors. Estimation of the measurement uncertainty by calibrated attenuator\gain. (2024). Eurasian Research Bulletin , 35, 5-12. https://geniusjournals.org/index.php/erb/article/view/6329