Effects Of Crushing on Cutting and Cleaning of Surface Facilities in Cutting and Processing of Polymer Materials

Article Sidebar

pdf
Published: Jan 10, 2022
Keywords:
Polymer shavings roughness cutter

Main Article Content

Fayzimatov Shukhrat Nomonovich
Fergana Polytechnic Institute, Department of Mechanical Engineering Technology and Automation, Professor
Ergashev Ilhomjon Olimjonovich
Fergana Polytechnic Institute Drawing geometry and engineering graphics Ph.d
Valikhonov Dostonbek Azim o’g’li
Fergana Polytechnic Institute Drawing geometry and engineering graphics. assistant

Abstract

This article is about cutting and polishing polymeric materials. Prepared on the nature of cutting modes during cutting and the effect of cutting modes on surface cleanliness.

Article Details

How to Cite
Fayzimatov Shukhrat Nomonovich, Ergashev Ilhomjon Olimjonovich, & Valikhonov Dostonbek Azim o’g’li. (2022). Effects Of Crushing on Cutting and Cleaning of Surface Facilities in Cutting and Processing of Polymer Materials. Eurasian Research Bulletin, 4, 17–21. Retrieved from https://geniusjournals.org/index.php/erb/article/view/353
Issue
Vol. 4 (2022): ERB
Section
Articles