Improvement of the Saw Cylinder of the Saw Gin Stand

Authors

  • Bobirmirzo Mirjalolzoda Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
  • Mutakhkhirkhon Abduvakhidov Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
  • Akmal Umarov Department of Industrial Engineering, Namangan Institute of Textile Industry, Namangan, Uzbekistan
  • Shukhrat Usmonov Department of Industrial Engineering, Namangan Institute of Textile Industry, Namangan, Uzbekistan

Keywords:

Stress, Displacement, Deformation

Abstract

The article examines the problem of increasing the rigidity of the saw cylinder of a saw gin by changing the cross-section of its shaft. It has been proposed to use a hexagonal shaft instead of a round shaft. Calculations were carried out using the SolidWorks Simulation program. Performed static, frequency, fatigue, as well as equilibrium and SolidWorks – Design Insight analysis of two types of saw cylinders. The influence of the shaft shape on the static performance of saw blades has been studied. The results made it possible to use a hexagonal shaft for the saw cylinder of the saw gin

Downloads

Published

2024-03-23

Issue

Vol. 28 (2024): EJET

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

Improvement of the Saw Cylinder of the Saw Gin Stand. (2024). Eurasian Journal of Engineering and Technology, 28, 50-67. https://geniusjournals.org/index.php/ejet/article/view/5792