Improvement of the Saw Cylinder of the Saw Gin Stand

Article Sidebar

pdf
Published: Mar 23, 2024
Keywords:
Stress Displacement Deformation

Main Article Content

Bobirmirzo Mirjalolzoda
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Mutakhkhirkhon Abduvakhidov
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Akmal Umarov
Department of Industrial Engineering, Namangan Institute of Textile Industry, Namangan, Uzbekistan
Shukhrat Usmonov
Department of Industrial Engineering, Namangan Institute of Textile Industry, Namangan, Uzbekistan

Abstract

The article examines the problem of increasing the rigidity of the saw cylinder of a saw gin by changing the cross-section of its shaft. It has been proposed to use a hexagonal shaft instead of a round shaft. Calculations were carried out using the SolidWorks Simulation program. Performed static, frequency, fatigue, as well as equilibrium and SolidWorks – Design Insight analysis of two types of saw cylinders. The influence of the shaft shape on the static performance of saw blades has been studied. The results made it possible to use a hexagonal shaft for the saw cylinder of the saw gin

Article Details

How to Cite
Bobirmirzo Mirjalolzoda, Mutakhkhirkhon Abduvakhidov, Akmal Umarov, & Shukhrat Usmonov. (2024). Improvement of the Saw Cylinder of the Saw Gin Stand. Eurasian Journal of Engineering and Technology, 28, 50–67. Retrieved from https://geniusjournals.org/index.php/ejet/article/view/5792
Issue
Vol. 28 (2024): EJET
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.