Technology for Obtaining HighQuality Castings from Resistance White Cast Iron

Authors

  • Saidmakhamadov Nosir Tashkent state technical university, University street 2, Tashkent, Uzbekistan
  • Docent Khalimjonov Tokhir Tashkent state technical university, University street 2, Tashkent, Uzbekistan
  • Docent Saidkhodjaeva Shokhista Tashkent state technical university, University street 2, Tashkent, Uzbekistan
  • Turaev Anvar Tashkent state technical university, University street 2, Tashkent, Uzbekistan

Keywords:

Casting, white cast iron, ferrochrome, ferromanganese

Abstract

This article calculated the ingots in order to obtain quality castings and liquefied them in an induction furnace. In addition, the scheme of placement of the supply disk in the casting mold, which provides a uniform distribution of bending on the surface to be strengthened during the cooling of castings, is based on the level of thermal conductivity of the mold walls. It is also designed to increase the hardness and ductility of the 280X29NL alloy based on the degree of dependence of the chromium element on its dispersion during liquefaction. This serves to ensure a uniform distribution of the elements in the alloy.

Downloads

Published

2022-04-30

Issue

Vol. 5 (2022): EJET

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

Technology for Obtaining HighQuality Castings from Resistance White Cast Iron. (2022). Eurasian Journal of Engineering and Technology, 5, 139-148. https://geniusjournals.org/index.php/ejet/article/view/1274

Most read articles by the same author(s)