Improvement Of Steel Liquidation Technology in Electric Arc Furnace

Article Sidebar

pdf
Published: Dec 2, 2021
Keywords:
Electric arc furnace alloys liquefied electrode

Main Article Content

Turakhodjaev N.D
Professor, Head Of Foundry Technologies Department, Tashkent State Technical University, Uzbekistan
Bekjanova V.B
PhD Student, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
Turaev A.N
Senior teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
Abdullaev F. K.
Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
Asatov S.N.
Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan

Abstract

This article examines the size, lining, quality of the loaded slurry, what fluxes should be used to separate the slag, what ferroalloys should be used for the melting of the elements, and its effect on the finished product. In addition, the advantages and disadvantages of the furnace were discussed.

Article Details

How to Cite
Turakhodjaev N.D, Bekjanova V.B, Turaev A.N, Abdullaev F. K., & Asatov S.N. (2021). Improvement Of Steel Liquidation Technology in Electric Arc Furnace. Eurasian Journal of Engineering and Technology, 1, 8–11. Retrieved from https://geniusjournals.org/index.php/ejet/article/view/202
Issue
Vol. 1 (2021): EJET
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.